Land Pride Accuz Z52 User Manual download pdf (Page 11)

Section 1 Assembly and Set-Up

03/11/03

Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M

Land Pride

Accu-Vac Assembly

Refer to Figure 1-9 on page 12

Land Pride offers as an option an Accu-Vac Collection

System designed to collect mower clippings into two 30

gallon rubber containers mounted on the back of the

mower.

WARNING!

Do not operate Accu-Vac System without remote air cleaner set-

up or engine damage may occur.

WARNING!

Do not operate mower without deﬂector chute or Accu-Vac in

place.

Mower Deck Preparation

Refer to Figure 1-6:

Park the Accu-Z mower on a flat surface. Shut off the

ignition switch and remove the key from the switch.

Disconnect the negative battery cable.

Before the Accu-Vac can be installed, the right side pulley

cover (4) and discharge chute assembly (1) must be

removed. Loosen the tensioner for the blade belt and

remove pulley (7). Parts 2, 3, 6 and 8 will be used to

assemble Accu-Vac.

NOTE: Accu-Vac Collection System cannot be

mounted on Accu-Z mowers manufactured with

Honda engines. Use only with Kawasaki engines.

NOTE: Retain all other parts as they will be re-installed

when the Accu-Vac is removed.

Chute, Pulley and Pulley Cover Removal

Figure 1-6

19907

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

No comments

Land Pride Accuz Z52 User Manual Page 11