Land Pride Power Screwdriver Powered Ditchers User Manual download pdf (Page 13)

Section 1: Assembly and Set-Up

3/17/08

DT55 & DTM55 Powered Ditchers 324-053M

Land Pride

Table of Contents

Ripper Option Assembly

Refer to Figure 1-6:

1. Assemble ripper Assembly (#1) to the main frame

with four 3/4” u-bolts (#2), lock washers (#3) and

3/4” nuts (#4). Tighten nuts to 170 ft-lbs. of torque.

Ripper Option Assembly

Figure 1-6

Skid Shoe Option Assembly

Refer to Figure 1-7:

1. Attach Skid Shoe (#1) to the main frame with

3/8”-16 x 1 1/4” GR5 round head square neck

bolt s (#2) and lock nuts (#3). Draw lock nuts up

snug, do not tighten.

2. Attach one end of turnbuckle (#5) to the main frame

lug with clevis pin (#6) and cotter pin (#4).

3. Attach other end of turnbuckle (#5) to the lug on the

skid shoe (#1) lug with clevis pin (#6) and cotter

pin (#4).

4. Bend one leg of each cotter pin to keep cotter pin

from falling out.

Gauge Wheel Option Assembly

Refer to Figure 1-8:

1. Assemble Gauge Wheel Assembly (#1) with hitch

pin (#2) and hair pin (#3).

20520

Skid Shoe Option Assembly

Figure 1-7

Gauge Wheel Option Assembly

Figure 1-8

25754

20519

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

No comments

Land Pride Power Screwdriver Powered Ditchers User Manual Page 13