Land Pride BH3512 User Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 34
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
13
Section 1: Assembly and Set-Up
7/14/08
BH3512 Backhoes 340-131M
Land Pride
Table of Contents
Using Tractor Hydraulics All Tractors
If you wish to use the tractor hydraulic system, consult
the dealer of your tractor for a safe and proper method of
connecting the Land Pride BACKHOE to your tractor.
Using Tractor Hydraulics John Deere
The return hose supplied with your Backhoe will not be
long enough. You will have to purchase a 1/2” return
hose with a length suitable for the following procedure.
Purchase a Port Filter Cover (JOHN DEERE Part
number AT301970) from your dealer if filter cover is not
already ported for an auxiliary return line. Install it on
your tractor.
Attach the backhoe’s pressure hose to the tractor quick
coupler. Attach the backhoe’s return hose to the port
filter cover that you installed. Move the control lever on
NOTE: Many newer John Deere tractors will already
be equipped for this return hose porting through
filter cover cap back to transmission sump.
the tractor so that it starts a flow to the backhoe valve,
and secure it in full open position.
The above procedure results in a direct connection to the
JOHN DEERE master pump, and eliminates a return into
the rear transfer pump chamber. The problem with
returning oil into the rear transfer pump chamber is that if
the tractor engine RPM is throttled down to a point at
which the oil transfer pump cannot supply sufficient oil to
the main system pump, the main pump runs out of oil in
its sump and starts chattering.
Mounting The Backhoe
Description of Major Backhoe Parts
Refer to Figure 1-5:
1. Familiarize yourself with all of the terms in the
following instructions “Description of Major Backhoe
Parts”.
IMPORTANT: Make sure that there is sufficient
clearance for the operator if the backhoe is mounted
to a tractor with a cab or is equipped with a ROPS.
The ROPS may need to be extended or flipped
around to obtain sufficient clearance.
Description of Major Backhoe Parts
Figure 1-5
20555
Boom
Stabilizer Cylinder L.H
Stabilizer
Main Frame
Bucket
Cylinder
Dipper Stick
Boom Cylinder
(Inside Boom)
Swing Cylinder L.H
Dipper Stick
Cylinder
Stabilizer
Cylinder R.H
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 33 34

Comments to this Manuals

No comments