Land Pride BH3512 User Manual download pdf (Page 18)

Section 1: Assembly and Set-Up

BH3512 Backhoes 340-131M

7/14/08

Land Pride

Table of Contents

Bucket Installation

Refer to Figure 1-10:

Assemble the bucket (#1) with the pins (#2) and roll pins

(#3) as shown.

Locking Bar Installation (Optional)

1. After the backhoe is attached to the tractor in working

position proceed with the following steps to install the

lower drawbar link locks in Figure 1-9.

2. Install pins (#3) through eyebolt (#2) with the

eyebolts being located on each side of backhoe

lower link sockets. Secure pins in place with lynch

pins(#4).

3. Install lower link lock angles right (J) and left (K) as

indicated in the drawing. Place lockwashers (L) and

install nuts (M) on eyebolts and snug nuts in place.

4. Adjust the 3/4” bolt against the tractor drawbar link.

Lock adjustment screw (N) with locknut (O).

5. Tighten eyebolt (#2) with nut and jam nut.

Bucket Installation

Figure 1-10

19369

Seat Assembly

Refer to Figure 1-11:

Assemble the seat as shown with the 3/8” flange nuts.

Adjust seat positioning to your comfort by releasing latch

located beneath the front of the seat.

Tractor Lower Link

Locking Bar Installation

Figure 1-9

Seat Assembly

Figure 1-11

19368

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 33 34

No comments

Land Pride BH3512 User Manual Page 18