Land-pride AT2572 User Manual download pdf (Page 20)

Section 4: Maintenance and Lubrication

FD2560, FD2572, AT2560 & AT2572 Grooming Mower, 3-spindle 310-148M

8/08/12

Land Pride

Table of Contents

Lubrication

CAUTION

For Safety reasons, each lubrication operation must be

performed with the tractor’s PTO disengaged, the mower

lowered completely, tractor engine shut off and ignition key

removed.

Service Daily

1. Grease the PTO u-joints.

2. Wheel support bushings.

3. Wheel bushing.

4. Bearing in blade spindle hubs.

PTO U-Joint

Coat PTO u-joint with grease every 8 hours of operation

Type of Lubrication: Multipurpose

Quantity = Coat Generously

Multi-purpose

spray lube

Multi-purpose

grease lube

Intervals in hours

at which lubrication

is required

Lubrication

Legend

Multi-purpose

oil lube

Hours

Service Every 50 Hours Of Operation:

1. With the moweron levelground,checkthe oil level in

the gearbox by removing the plug in the side of the

box. The oil should reach the plug hole. If oil level is

low, remove the top plug in the gearcase and fill with

SAE 90 oil until oil flows from side port of the

gearbox. Reinstall plugs and retighten.

2. Disconnect PTO shaft from the tractor and slide

apart.Clean and coattheinner tubeofthe PTO shaft

with a light film of grease and then reassemble.

IMPORTANT: Do not overﬁll! Should your gearbox

require repair, take it to your Land Pride dealer.

PTO Shaft

Disconnect PTO shaft from the tractor and slide apart.

Clean and coat the inner tube of the PTO shaft with a

light film of grease and then reassemble.

Type of Lubrication: Multipurpose

Quantity = Light Film

Hours

12559

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Land-pride AT2572 User Manual Page 20

Comments to this Manuals

Related products and manuals for Gardening equipment Land-pride AT2572