Land Pride RCP3060 User Manual download pdf (Page 26)

Section 1: Assembly & Set-up

RCP2660, RCPM2660, RCP3060 and RCPM3060 Parallel Arm Rotary Cutter 316-111M

12/16/08

Land Pride

Table of Contents

Gauge Wheel Model Set-up

Refer to Figure 1-20:

The deck with gauge wheels is shipped from the factory

completely assembled to the parallel arm with the

exception of installing the rear ratchet jack and one

gauge wheel.

Ratchet Jack Installation

1. Check 5/8" hex flange lock nuts attached to bolts (#3).

They should be drawn up snug, not tight. A-frame (#2)

should pivot freely on the two bolts.

2. Cut ties securing A-frame (#2) and rotate frame to

position it behind the deck as shown.

3. Install ratchet jack (#8) to cutter deck with 1" dia.

clevis pin (#6). Secure with hair pin (#3).

4. Attach opposite end of ratchet jack to A-frame (#2)

with 1" dia. clevis pin (#6). Secure with hair pin (#5).

Gauge Wheel Set-Up

Figure 1-20

24617

Gauge Wheel Installation

1. Install 1 1/4" I.D. machine washer (#4) over yoke

spindle (#1) as shown.

2. Insert yoke spindle (#1) into the front support frame.

3. Install second 1 1/4" I.D. machine washer (#4) over

yoke spindle (#1).

4. Secure yoke spindle to frame with 5/16" dia. roll

pin (#7).

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

No comments

Land Pride RCP3060 User Manual Page 26