Land Pride AFM4016 User Manual Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 50
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
11
Introduction
7/28/06
AFM4011, AFM4014 and AFM4016 All Flex Grooming Mowers 315-160M
Land Pride
Table of Contents
Introduction
Definitions
Owner Assistance
The Warranty Registration card should be filled out by
the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
If customer service or repair parts are required contact a
Land Pride dealer. A dealer has trained personnel, repair
parts and equipment needed to service the implement.
The parts on your All-Flex Grooming Mower have been
specially designed and should only be replaced with
genuine Land Pride parts. Therefore, should your All-
Flex Grooming Mower require replacement parts go to
your Land Pride Dealer.
Serial Number Plate
For prompt service always use the serial number and
model number when ordering parts from your Land Pride
dealer. Be sure to include your serial and model numbers
in correspondence also. Refer to Figure 1 for the location
of your serial number plate.
Serial Number Plate Location for Model 4011
Figure 1
Serial Number Plate Location for Models 4014 and 4016
Figure 2
NOTE: A special point of information that the
operator must be aware of before continuing.
IMPORTANT: A special point of information related
to its preceding topic. Land Pride’s intention is that
this information should be read and noted before
continuing.
15015
15016
Land Pride welcomes you to the growing family of new
product owners.
This AFM40 All-Flex Grooming Mower has been
designed with care and built by skilled workers using
quality materials. Proper assembly, maintenance, and
safe operating practices will help you get years of
satisfactory use from the machine.
Application
The 11, 14, and 16 foot All-Flex Mowers are designed
and built by Land Pride to provide excellent cutting
quality and performance on lush type turf grasses that
are located on expansive and well manicured areas such
as sports fields, theme parks, fairways, turf farms, and
large estates.
The AFM4011 requires attachment to a 30-65 hp turf
tractor while the AFM4014 and AFM4016 will deliver
excellent performance when attached to 40-70 hp
tractors. All AFM models are adapted for attachment to
540 rpm pull-type draw bar. They can be ordered with
slip-clutch or conventional wing driveline configurations.
The mower offers independent deck flotation and zero
turning radius due to the sleek frame design. When you
need to transport one of these mowers from one mowing
site to another on a public street or right-of-way the
hydraulic wing cylinders will easily lift up the wing decks
for a 5’-6" transport width on the AFM4011 or 6’-8"
transport width on the AFM4014 and AFM4016
mowers.The contour following capability, highly
productive cutting widths, and rear discharge design of
the floating cutting decks will greatly reduce wide-area
cutting times and still deliver finely groomed surfaces at
mowing speeds from 2-6 mph.
See “Section 6: Specifications & Capacities” and
Section 7: Features & Benefits” for additional
information and performance enhancing options.
Using This Manual
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
To order a new Operator’s or Parts Manual contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge from our website at
www.landpride.com or printed from the Land Pride
Service & Support Center which is already at your
dealership.
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 49 50

Comments to this Manuals

No comments