Land Pride AFM4016 User Manual download pdf (Page 17)

Section 1: Assembly and Set-up

7/28/06

AFM4011, AFM4014 and AFM4016 All Flex Grooming Mowers 315-160M

Land Pride

Table of Contents

Bleeding The Fold Hydraulics

CAUTION!

Hydraulic ﬂuid under pressure can penetrate skin. Wear

protective gloves and safety glasses or goggles when working

with hydraulic systems. Use a piece of cardboard or wood

rather than hands when searching for hydraulic leaks. If

hydraulic ﬂuid is injected into the skin, it must be surgically

removed within a few hours by a doctor or gangrene may result.

With the mower decks lowered onto the ground, remove

the connecting pins from the 2 wing cylinder rod ends

and the center deck cylinder. Support the cylinders in a

vertical position rod end up. Cycle the hydraulic system

to extend both of the wing cylinders and the center deck

cylinder. Retract the cylinders and repeat this process 2

times. On each cylinder, crack the rod end cylinder fitting

and apply hydraulic pressure until air free oil leaks from

the fitting and retighten. Support the cylinders in a vertical

position with the butt end up and repeat the bleeding

process on the rod end cylinder fitting.

Repin all of the rod end clevises. Slowly cycle all decks to

transport position checking to make sure the hydraulic

hoses are not pinched in the process.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 49 50

No comments

Land Pride AFM4016 User Manual Page 17