Land Pride AFM4016 User Manual download pdf (Page 26)

Section 5: Maintenance and Lubrication

AFM4011, AFM4014 and AFM4016 All Flex Grooming Mowers 315-160M

7/28/06

Land Pride

Table of Contents

Blade Removal And Installation

CAUTION!

Depending on blade rotation, bolts attaching mower blades to

their respective spindles may be either left hand or right hand.

Prevent spindle and/or bolt damage by knowing which hand

the threads are before removing and/or tightening any blade

mounting bolts.

Refer to Figure 4-2 & Figure 4-3:

1. Verify blade rotation and bolt thread type (right hand

or left hand) before loosening center blade bolt and

removing blade to be sharpened or replaced.

Refer to Figure 4-4 & Figure 4-5:

2. Remove blades by grasping the blade end with a rag

or thick padded glove while loosening the blade

mounting bolt.

NOTE: Center blade bolt on the left hand deck is

right hand threads. Center blade bolt on the right

hand and center decks are left hand threads. Two

outside blade bar bolts are right hand threads.

3. Remove the center blade bolt (#4) and Washer (#5)

from the bottom only of the blade to be replaced.

4. (Model 1416 Only.) Remove the two outside bolts to the

blade bar (#2).

5. Reinstall blade (!#1), blade washer (#5) and bolt

(#4). Care should be taken when installing the blade

bolt to not get it cross threaded and to know if the bolt

is right hand or left hand. Do not exceed 55 ft.-lbs. of

torque on bolt.

IMPORTANT: Replace blades with Land Pride

blades only.

IMPORTANT: Always install blades with cutting

edge facing direction of blade spindle rotation and

with wing tips pointing up towards bottom of deck.

IMPORTANT: Loctite is not required if blade (#1) is

removed without removing blade bar (#2). However,

If blade bar (#2) is removed from spindle shaft (#3),

then apply loctite 243 to spindle shaft threads and to

center bolt threads (#4).

Blade Placement

Figure 4-2

Blades Rotation: CW / Center Blade Bolt: R.H Threads

Top View of Left Hand Deck Belt Drive

Blades Rotation: CCW / Center Blade Bolt: L.H Threads

Top View of Center and Right Deck Belt Drive

12697

12698

Models 4011 Shown

Blade Placement

Figure 4-3

Blades Rotation: CW / Center Blade Bolt: R.H Threads

Top View of Left Hand Deck Belt Drive

Blades Rotation: CCW / Center Blade Bolt: L.H Threads

Top View of Center and Right Deck Belt Drive

13662

13661

Models 4014 & 4016 Shown

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 49 50

Comments to this Manuals

No comments

Land Pride AFM4016 User Manual Page 26

Comments to this Manuals

Related products and manuals for Garden tools Land Pride AFM4016