Land Pride RCR1884 User Manual download pdf (Page 19)

Section 1: Assembly and Set-Up

9/24/08

RCR1884 Series Rotary Cutters 312-880M

Land Pride

Table of Contents

Driveline Shortening

Figure 1-12

Refer to Figure 1-12:

6. With driveline profiles pulled apart, apply multi-

purpose grease to the inside of the outer profile and

reassemble the two profiles.

7. Attach inner driveline yoke to the gearbox shaft and

outer driveline yoke to the tractor's PTO shaft.

8. The driveline should now be moved back and forth to

insure that both ends are secured. Reattach any end

that is loose.

Refer to Figure 1-10 on page 15:

9. Hook a safety chain in the hole on the outer driveline

yoke shield and its opposite end to the tractor.

10. Hook the other safety chain in the hole on the inner

driveline yoke shield and its opposite end to the

cutter.

11. Start tractor and raise Rotary Cutter just enough to

remove support blocks fro under the cutter deck.

12. Slowly engage tractor’s 3-point controls to lower the

cutter. Check for sufficient drawbar clearance. Move

drawbar ahead, aside or remove if required.

22311

IMPORTANT: Two small chains are supplied with

the driveline. These chains must be attached to

outer and inner driveline yoke shields and to the

cutter deck and tractor to restrict driveline shields

from rotating.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 37 38

No comments

Land Pride RCR1884 User Manual Page 19