Land Pride RCR1884 User Manual Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 38
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
10
Section 1: Assembly and Set-Up
RCR1884 Series Rotary Cutters 312-880M
9/24/08
Land Pride
Table of Contents
3-Point Hitch Assembly
Refer to Figure 1-3:
1. Remove inside linch pins (#17) and assembly hitch
straps (#2A & #2B) over threaded bushings (#16) as
shown. Install 1 1/4” flat washers (#15) and secure
with 1 1/4” lock nuts (#14). Tighten lock nuts to the
correct torque. Reference Torque Chart on page 33.
2. Reinstall linch pins (#17).
3. Assemble rear hitch braces (#3) to the inside of rear
strap lugs (#13) with 5/8"-11 x 1 1/2" GR5 bolts (#6)
and 5/8" hex flange lock nuts (#9). Draw lock nuts up
snug.
IMPORTANT: Tighten all flange lock nuts snug. DO
NOT torque nuts tight. All connections must be
allowed to pivot.
3-Point Hitch Assembly
Figure 1-3
24654
Draw Lock nuts 8A & 8B up snug
and then back off 1/4 turn.
4. Rotate hitch straps (#2A & #2B) up as shown and
Insert 3/4”-10 x 4 1/2” GR5 hex head bolt (#7A)
through hitch strap (#2A), machine washer (#11),
hinge bar (#4), spacer (#5A), hinge bar (#4),
machine washer (#11) and hitch strap (#2B) as
shown. Secure with hex flange lock nut (#8A). Draw
lock nut up snug and then back off 1/4 turn.
5. Insert 3/4”-10 x 4 1/2” GR5 hex head bolt (#7B)
through rear hitch brace (#3), flat washer (#10),
hinge bar (#4), spacer (#5B), hinge bar (#4), flat
washer (#10) and rear hitch brace (#3) as shown.
Secure with hex flange lock nut (#8B). Draw lock nut
up snug and then back off 1/4 turn.
6. Pivot hinge bars (#4) up and insert stop pin (#1) in
the hinge bars (#4) as shown. Stop pin must be
positioned above the rear hitch braces (#3) when
completed. See “Figure 1-2” on page 9.
7. Insert 2 cotter pins (#12) in the stop pin as shown.
Secure cotter pins by bending one leg of each cotter
pin 45 degrees or more.
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 37 38

Comments to this Manuals

No comments