Land Pride RCR1884 User Manual download pdf (Page 16)

Section 1: Assembly and Set-Up

RCR1884 Series Rotary Cutters 312-880M

9/24/08

Land Pride

Table of Contents

Rear Metal Deflector Assembly

The rear metal deflector is factory supplied and must

be removed before the rear chain guard option can

be installed.

DANGER

Do not operator cutter without rear protection. Do not

remove rear deﬂector (#4) unless it is replaced by a Land

Pride chain guard. Serious body injury or loss of life can

result without a rear deﬂector or rear chain guard.

Refer to Figure 1-8:

1. Unscrew 1/2” whiz nuts (#5) and 1/2” hex flange

lock nuts (#6). Remove rear metal deflector (#1)

from deck rear.

2. Attach carriage bolts (#4) with whiz nuts (#6) to

rear deflector for safe keeping. Keep 1/2” x 1 1/2”

carriage bolts (#3) for reattaching tailwheel

vertical support (#2) to deck during chain guard

installation.

3. Store rear deflector for reuse if chain guard

damaged or removed.

Rear Chain Guard Installation (Optional)

Refer to Figure 1-9:

4. Install center chain guards (#3 & #4) with four

new 1/2”-13 x 1” GR5 (#7) carriage bolts (#7) as

shown. Secure with 1/2” whiz nuts (#8). Do not

tighten nuts.

5. Reattach tailwheel vertical support (#5) with four

existing 1/2”-13 x 1 1/2” GR5 carriage bolts (#6).

Secure with 1/2” hex flange locknuts (#9). Do not

tighten nuts.

6. Install far left and right chain guards (#1 & #2)

with four 1/2”-13 x 1 1/2” GR5 carriage bolts (#7)

and 1/2” whiz nuts (#8) as shown.

7. Tighten all 1/2” nuts (#8 & #9) to 76 ft-lbs as

indicated in the “Torque Values Chart” on

page 33.

Rear Metal Deﬂector

Figure 1-8

Rear Chain Guard

Figure 1-9

24658

24659

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 37 38

Comments to this Manuals

No comments

Land Pride RCR1884 User Manual Page 16

Comments to this Manuals

Related products and manuals for Lawnmowers Land Pride RCR1884