Land Pride RCR1884 User Manual download pdf (Page 29)

Section 5: Maintenance and Lubrication

9/24/08

RCR1884 Series Rotary Cutters 312-880M

Land Pride

Table of Contents

Lubrication

Gauge Wheel Spindle Tube

Type of Lubrication: Multi-purpose Grease

Quantity = 6 pumps

Gauge Wheel Hub

The gauge wheel hub is equipped with a relief hole

located directly opposite the grease fitting. The relief

hole releases pressure from inside the hub casting

when it is greased. The hub should be greased until

grease purges from the relief hole.

Type of Lubrication: Multi-purpose Grease

Quantity = Until grease purges from the relief hole

Gearbox

Unscrew top vent plug in gearbox to remove dipstick. Wipe

oil from dipstick and screw it back in without tightening.

Unscrew dipstick and check oil level mark. If low, fill

through top plug hole in gearbox with 80-90W EP oil until oil

reaches full mark on the dipstick. Reinstall vent plug with

dipstick and tighten.

Take your gearbox to a Land Pride dealer if it requires

service.

Type of Lubrication: 80-90W EP Gear Lube

Quantity = Fill until oil reaches full mark on dipstick.

IMPORTANT: Do not overfill! Level cutter and wait

for gearbox oil to cool before checking. An unlevel

cutter or a gearbox with hot oil will not show correct

oil level on the dipstick.

24584

IMPORTANT: Your cutter is shipped with the

gearbox vent plug with dipstick packaged in the

Operator’s Manual bag and should have been

installed in the gearbox by your Land Pride dealer.

Please see your Land Pride dealer if the vent plug

with dipstick was not included.

24652

Hours

hrs

Multi-purpose

spray lube

Multi-purpose

grease lube

Multi-purpose

oil lube

Intervals in hours at which

lubrication is required

Lubrication

Legend

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 37 38

Comments to this Manuals

No comments

Land Pride RCR1884 User Manual Page 29

Comments to this Manuals

Related products and manuals for Lawnmowers Land Pride RCR1884